HP Printer Reset Counter [Quick Guide]

HP Printer Reset Counter [Quick Guide]

The instructions below will guide you on how to perform a counter reset on an HP printer.

How to Reset Counter on HP LaserJet 5si

To reset the counter on HP LaserJet 5si, the maintenance kit must first be installed. Once you are sure that the maintenance kit is installed, then go to the “Configuration Menu” on your printer’s control panel. Locate “Service Message” and select the “Off” option.

How to Reset Counter on HP LaserJet 8150, 8100, and 8000

You should try the instructions we just shared above for resetting the counter on HP LaserJet 5si. However, if the instruction doesn’t work as most people have complained, then you can do the following steps as an alternative solution:

Step 1: Install the maintenance kit.

Step 2: Go to service mode on your printer.

Step 3: Navigate to the screen for “MAINTCOUNT”.

Step 4: Reduce the digit(s) to all zeros or zero as the case may be by pressing “-” or “+” on your printer.

Step 5: Input the changed settings into your printer’s memory by pressing the button for “Select”.

Step 6: Press the button labeled “GO” to exit the service mode.

While doing the steps above, ensure that you don’t change the value settings for “Maintenance Interval”.

How to Reset Counter on HP LaserJet 5000, 4100, 4050, and 4000

To reset the counter on any of the above-listed HP LaserJet printers, use the steps in this shortcut method:

Step 1: Turn off your HP printer.

Step 2: Press down the “Value” and “Item” keys on your printer.

Step 3: Turn on your HP printer.

Step 4: Wait until you see “Maintenance Count” on the screen before letting go of the keys.

If the above steps don’t work as reported by some persons, then you have to find the service mode of your printer to perform the reset.

How to Reset Counter on HP LaserJet 9000, 4359, 4250, 4300, 4200, 4101MFP, 4100MFP

To reset the counter on any of the above-listed HP LaserJet printers, then follow the steps below:

Step 1: Turn off your HP printer.

Step 2: Turn on your HP printer.

Step 3: Press down the “Select” button on your printer as the memory counts. The memory counting will begin from 000MB as soon as your printer is powered on.

Step 4: Keep pressing down the button labeled “Select” until you see all the three LED indicators light up.

Step 5: Let go of the “Select” button.

Step 6: Press the up navigation arrow button until you see a “New Maintenance Kit” message on the display.

Step 7: Press the printer’s “Select” button just once.

Note: For HP 9000, 4300, and 4200 LaserJet printers, you can press down the “Select” button while you turn on your printer and wait for your printer’s LED indicators to light up. Whereas, for HP 4350 and 4250, you will have to wait for your printer to power on first, and then begin the memory count before your press down the “Select” button.

Once you have done the steps above, you will see “New Maintenance” displayed on the screen and your HP device will reset.

Another way to reset the counter is to make use of any reliable HP printer counter reset software. You can find one online, but ensure that it is reliable and safe before downloading and using it.

https://zimhomeprinter.com/